Published on August 30th, 2015 | by Amanda1
Best Coil Jigs for Vaping
Trying to get those tiny coils in place is hard enough work without having to try and figure out how you are going to wind them to the perfect resistance and tightness.
Thankfully a great coil jig is going to do all of that work for you.
They will allow you to make your own coils from kanthal wire.
There are so many coil jigs that are available for you to purchase that you might struggle with trying to find the best coil jigs. Don’t worry anymore.
We are going to tell you the best coil jigs so that you can find what you need to enhance your vaping experience.
Hog Vaping RDA Coil Jig
The Hog Vaping RDA coil jig comes full assembled in the box. It is easy to start using it right away since you do not have to do anything other than put the right size pin in.
There is a threaded hole where the coil peg fits. The thumb screw is made from stainless steel and is used to secure the coil wire.
You can store the pegs inside the coil jig when they are not in use. This is a great little feature that helps you to not lose the pegs when they are not in use.
There are three coil winding pegs that are included with the jig. These allow you to wind the coil wire into different sized coils so that they will perfectly fit your RBA or RDA. The coil pegs are 1.55 mm, 2.36 mm and 3.17 mm.
Users rate the Hog Vaping RDA Coil Jig as one of the best coil jigs because of the great features and premium quality.
You will instantly notice when you are using it that all of the threading is very smooth. Plus there are no rough edges as they have all been rounded off to make it easy to carry with you.
They also love that it easily fits into a small tool kit or can be thrown in a backpack or purse pocket.
To get started with the jig you just pick out which size of coil you want to make. Then you put the peg into the hole. From there you will pull the wire out.
While holding the jig in one hand, you will be able to easily wrap the wire around the peg tightly. You will not even need to secure the other end of the wire which makes it a little quicker to use than some other jigs on the market.
Once you have your coil wrapped the number of times that you want, it is necessary for you to use a pair of tweezers to squeeze the coil together.
Then you can cut the wire when it is complete. Then you just loosen the screw that holds the peg in place and remove the peg. Conveniently you can leave the coil on the peg when you remove it which makes it easier for you to use later.
With this choice you are actually able to just lay the peg across the RDA deck and position the coil in place. Once in place you can slide the peg out.
The Hog Vaping RDA Coil Jig really does make it easy for you to have a nice tight coil that is easily used.
Coil Master Coil Jig
If the Hog Vaping RDA Coil Jig is just a bit too big for your taste then you are going to love the Coil Master Coil Jig.
The Coil Master actually fits into the palm of your hand and is so small that you can take it anywhere with you. Its compact design makes it one of the favorites among users and reviewers alike.
Many love how simple this coil jig is to use as well. It is one of the best choices if you want something that is simple and compact.
The Coil Master Coil Jig is a contender as the best coil jig because it allows you to be able to use it with five different coiling rods.
The following sized poles are included: 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, and 3.0 mm. There are also three colors to choose from with red, blue, and black.
This vape coil jig is constructed out of top quality materials. It is made from aluminum. The design is worked out well and all of the parts fit together with little effort.
The poles each fit into the base and once things are screwed in place there is no wiggling or movement. The wire easily goes through the holes because they are drilled at an angle that makes the process simple.
The finish of the model is nice and smooth as well which means that it easily fits in your hand and that it is nice to hold onto. There are a lot of pieces with this kit and sadly they do not all fit together.
You can leave the jig put together with one of the poles but if you want different sizes of wires for any reason than you have to figure out where you are going to put these small polls without losing them.
All in all the Coil Master Coil Jig is a great little tool that allows you to carry your jig with you in your pocket.
The jig can be put anywhere thanks to its small size. It also winds perfectly tightened coils that are easily removed so that you can use them in your RDA or RBA.
KKVapeTech Coil Jig
The KKVapeTech Coil Jig is being haled as a great coil jig by users and reviewers alike. One of the things that many people like about this coil jig is how simple it is to use.
It is a great little tool that is small and compact.
Although it should be mentioned that it has sharp edges that have not been rounded. This should be mentioned since other models have rounded edges.
Users love that the coils are tight and consistent every single time with this vape coil jig. There are also three different sizes of rods that are included to give you different sized coils.
The ones that are included are 1/16”, 3/32”, and 1/8”. There is the ability to hold larger rods if you are interested in having some bigger ones. Then you will likely to be able to use it with the coil jig if you purchase the rod separately.
The coil jig actually accommodates rods up to 9/64”.
Another really unique feature of the KKVapeTech Coil Jig is that it actually can be used as an atomizer stand as well.
There is a 510 thread connection in the center of the unit that you can use if you would like for it to be an atomizer stand. It is important that the coils be removed before you torch them or you could potentially damage the jig.
There is also a storage compartment that allows for you to keep the different sized rods with it all of the time as well.
This is something that is not seen with all models and is definitely something that comes in handy so that you do not lose pieces.
Revolver Coil Jig
The Revolver Coil Jig is another one of the best coil jigs that is available right now. Boom Boom produces this high quality coil jig that allows you to have coils made from a wide variety of different types of wire including wide gauged American wire.
This means that you will have a lot of different types of coils. The Revolver Coil Jig comes in a nice metal box that you can use to keep the unit stored in and for carrying purposes.
There are three different sizes of pins that are included with the Revolver Coil Jig which means that you can make coils in three different sizes.
The three difference sizes included are 2 mm, 2.5 mm, and 3 mm. Thanks to foam that is in the package you will not have the jig and pins rolling around when you are carrying it in your bag or purse.
This means that you will be able to take it with you anywhere without fearing that it is going to get damaged.
On top of that this is one of the most user friendly jigs that you will find. It is very simple to use. You just need to start by inserting the wire into the handle.
Then you hold onto the wire so that it does not pull through too much. Next you need to pull the loose end around the shaft.
After this you just place the winder over the wire and wrap it until the wire is in a tight coil. Next you just slide the wire off carefully after the pin has been removed.
Using a coil jig is a great way to make sure that you have the nice tight and uniform coils that you need for your RBA and RDA.
Thankfully the best coil jigs offer you high quality and ease of use that make them perfect for both experienced and new vapers.