Published on December 25th, 2016 | by Amanda
0Dovpo TC-50 Mod Review
The Dovpo TC-50 mod is just one of the latest mods on the market today. This mod features everything that you need to get started vaping and more. For a 50 watt mod you are going to find that this mod offers a number of features and benefits that other mods in the same category do not. This variable wattage mod has everything that you need and features temperature controls as well. What’s New – Dovpo TC-50 Mod The style of the Dovpo TC-50 mod is something that needs to be talked about up front. This mod is sleek and looks beautiful. I really love having this mod because I feel like it is such a stylish choice. It is lightweight without feeling cheap. The logos are large and clear so everyone knows what you are vaping with. If you prefer something with smaller logos then this look might not be your favorite. Since I personally like the Dovpo logos I don’t mind these. The mod is black in color but features silver trim. The logos are done in white and the overall look is very pleasing to the eyes. Now if you are worried about your mod getting scratched or messed up there is actually a silicone sleeve available for purchase. This is great for you because it is going to allow you to be able to actually keep your mod protected but still have it looking stylish. I have struggled in the past with dropping my mods and hating that they became all banged up looking. One thing that I really appreciate about this mod is the chance to pick up the sleeve and make sure that it continues looking great. One thing that I think is very important to mention in any Dovpo TC-50 review is that the mod actually has a floating 510 pin. This makes it a little more difficult to screw on your tanks from time to time. I did notice that it required a little more than the typical minimal effort but that it was not overwhelming as it could have been. Regardless of the tank that I have used with this, I have been able to get them completely flush with the mod and have avoided having gaps. I really like that the venting grooves on the top of the mod allow for superior airflow. This means that you have less of a chance of the mod overheating. Another thing that I want to mention is that the buttons are nice and clicky. I don’t know if this is something that is really that important to everyone but I like for the buttons to be clicky when I am using them. The battery area features a sliding cover that is on the bottom of the unit. It is held together with two high quality magnets which makes it easier to use. For me this made changing the batteries very simple which is nice when some mods actually require considerable effort to swap them out. Now I will mention that the battery area is a little different than most. I have noticed in almost every mod that I own that the batteries are put in with the positive connections at the top. With this mod the battery’s positive connections are actually on the bottom. So it can be challenging if you are an experienced mod user to remember that this mod is different than all of the others. Of course if you are a new user then this can work out well since this would be the only thing that you had known. Just remembering that your battery goes in upside down in this mod will make it possible for you to have an easier time. Also keep in mind that the battery features a reverse protection, so there are no worries of actually having problems with the battery and ruining your mod should you put it in wrong. If you install the battery in the wrong direction then you will notice that it just does not work. So if your mod is not turning on then one of the first things that you should check is whether or not the battery is installed correctly. While this mod is not the smallest that I own, it is still comfortable in the palm of my hand. So it comes to you at a size that you are going to be able to use comfortably. The LED screen is large which makes it easier to read. It is also very bright. The only problem with this is that if you are outside in the sun it is actually kind of hard to read. You might find that it is very difficult which can make it harder if you are outdoors a lot. I had a very hard time reading the LED screen outdoors but never an issue when I was indoors. The battery venting system is the only thing that I would say might need a few improvements. When I am holding the device it seems like I often cover up the battery vents. This can be dangerous and can cause the device to get overheated. Maybe if the vents were larger it would make the venting better or something along this nature. The other thing that could potentially be an issue is that the battery charging area is at the bottom. This means that you have to lay your mod down while it is charging. I know that this is something that bothers some people so I wanted to mention that as well. Specifications
- 3.2V-4.2V Operating Voltage
- 23A Maximum Output Current
- 1W-50W Operating Wattage
- Nickel 200 Atomizers Temperature Control Function
- .1-1.0 ohm Resistance Range
- Temperature Control Range between 200F and 600F
- .1-3.0 ohm Working Resistance Range
- Auto Recognition Detects Normal or Nickel 200 Atomizer
- Low Voltage Protection
- Short Circuit Protection
- Battery Reversal Protection
- Overheat Protection
- Memory Function with Power Off
- Warning for Overtime Vaping
- 1 x 18650 External Battery Required
- 510 Connection Spring Loaded
- USB Cable Charging Supported
- Operating LED Screen (shows voltage, wattage, temperature, and resistance)
- 8.3 cm x 3.9 cm x 2.4 cm
- Construction from Aluminum Alloy
Using Your New Dovpo TC-50 Mod The Dovpo TC-50 mod is one of the easiest to use mods. To use this mod you just need to be able to use the 5 click method to turn it on. This makes it easy for you to use but not so easy that a child can figure it out and turn it on. Now if you have not used a mod before you might find the Dovpro TC-50 mod’s manual to leave a lot to be desired. It is actually quite difficult to figure out. I know personally that I find it to be tough to figure out. The first step to being able to use this mod is that you make sure that you have the battery inserted correctly and then you will need to close the battery cover. After doing this you will want to use the 5 click method to fire it on. Once it is turned on, you will find that the logo will appear on the mod screen which is how you know that it is ready to use. When the device is on you can use five clicks to lock and unlock the device. This is an extra safety precaution that is quite nice. As with all things I would highly recommend reading the entire manual before using the mod. You want to make sure that you choose a mod that is going to be safe and one that you can work with. So make sure that you understand how to use the different features and how to keep the device safe. What’s Included?
- 1 x Dovpo TC-50 Mod
- 1 x Micro USB Charging Cable
- 1 x User Manual
- 1 x Dovpo Product Card
- 1 x Scratch and Dent Check Authenticity Code on Box
- 1 x Giftable Box
Final Thoughts – Dovpo TC-50 Mod The Dovpo TC-50 mod is one of the best choices that you can find on the market today for the money. It is a great little 50 watt mod that makes vaping easy and is perfect for those who are wanting more from their vaping experience. It has a number of built in safety features that make it easy to use and a great choice for you to have when you are trying to vape safely. This is something that I always worry about after seeing so many horror stories about things that happen to vapers. Also since there are kids around I like the mods that have the safety features that keep me from being overly paranoid about what would happen if one of the kids picked it up. While there are a few things that I would personally like to see changed with this mod, I believe that it is an overall great little mod that works like it is supposed to and will help you to have a great vaping experience.
