Published on August 29th, 2016 | by Rob0
Eleaf iPower 80W TC Box Mod Review | Vape Mod
The Eleaf iPower integrates Eleaf and Joytech’s latest technology to introduce a new Smart mod for an exhilarating experience of vaping.
It has an incredible 5000 mAh battery bank, to provide a longer uninterrupted experience of vaping.
With three memory modes and ten output settings, this intuitive device is a well-balanced mod in its segment.
Features of the iPower 80w
- 1 Eleaf iPower 80W Kit
- 1 Micro USB Cable
- 1 User Manual
Body and finish
The dimensions of the mod are 49.5 x 23.5 x 83.5 millimeters.
The ipower has an aluminum construction with a four button control interface.
It’s a sleek and smart design with a two-line OLED screen.
The Eleaf ipower applies the latest firmware to its design that features a VW interface, custom logo and Smart mode and gold- plated 510 spring connector.
The spring connector gives high-resistance and strong adaptability to the device. The power is equipped with dual-circuit protection.
The Eleaf ipower has a maximum output of 80-watt power.
It is equipped to give out high-temperature warnings.
The various power range
- Output mode: B ypass,Variable wattage, smart temperature control (SS, Ni, Ti, TCR-M1, M2, M3)
- Output-wattage: 1-80; watts
- Resistance-range: 0.05-1.5ohms (temperature-control modes), 0.1-3.5ohms (variable-wattage, bypass modes)
- Temperature-range: 100-315C/200 600F (TC-modes)
The iPower has a 5000 mAh battery capacity.
It can be charged with a USB port located at the base of the device-with a 1A-wall adapter or-a computer.
The ipower can be-upgraded by connecting to the PC using the USB port with the micro USB cable.
There is a new reset function in the ipower. It can be pressed along with the up button to reset the device, in case it does not get powered after an upgrade.
The smart mode function enables the device to sense the resistance of the atomizer, which helps in using ten different output settings. It also has three memory modes in the TCR mode.
Final Thoughts on the Eleaf iPower 80w
The ipower is an ergonomically designed mod which has a smart body layout.
The buttons are easy to operate and the OLED screen makes it convenient for the user to switch between the temperature and wattage controls.
The start-up logo on-the screen can be customized with a 96 x 16 BMP image-onto the box through Eleaf’s software.
The mod is available in 3 different colors but the wood-grain finish is absolutely classic.
An underside to the design could be the 23.5 mm diameter which could be a little large and seem bulky in design.
The 5000 mAh battery is a large capacity and will give a long vaping experience without charging frequently.
Moreover, it requires low charging downtime at a maximum current of 1A.
The dual circuit protection system gives protection against charging issues like over-charging, over-current and over-discharging. The device is easy to charge using the USB port.
The ipower mod has a high output of 80W.
The temperature control is supported by Ni200 Nickel, Titanium, and Stainless Steel heating elements and comes with a TCR mode.
It enables users to adjust 3 memory modes. The smart mode option senses the resistance of the atomizer automatically and allows the user to set up 10 output settings.
This features aids in switching between different atomizers with ease.
The Eleaf ipower mod is a fully-equipped mod with sleek features and ergonomic design.
The Smart mode and the cutting output technology, along with the large volume of battery capacity, make this mod a good buy at the relatively reasonable pricing.